COMMUNICATION SOLUTIONS

Silicon for Wireless

Available from Arrow, the Analog Devices family of products for wireless applications offers everything from signal processing ICs to microcontrollers and reference designs and will suit applications as diverse as microwave instrumentation and metering equipment.


Microwave Instrumentation

Providing end-to-end wireless coverage, virtually every wireless call made today passes through Analog Devices' silicon. The company’s comprehensive portfolio of signal processing ICs, chipsets, reference designs and tools are specified by design engineers worldwide for use in handsets, wireless infrastructure systems, software radio, RF/IF circuits, transmitters and transceivers and power management equipment.

Analog Devices' products have the high performance specifications that reduce component count, decrease cost and simplify design challenges for virtually every wireless standard and architecture as well as for wireless instrumentation and low cost data links.


SRD Based Monitoring

Note: Both diagrams can be found in the Wireless Applications Brochure available below.

To help designers select the most appropriate products, Arrow can now provide the Analog Devices wireless applications brochure. This brochure details some of the latest additions to the Analog Devices range.

Among the new products featured are:

• AD8318 wide bandwidth 70dB logarithmic detector/controller
  • 1MHz to 8GHz
  • High accuracy: ± 1.0dB over 55dB range
  • Excellent temperature stability
• AD8352 2GHz ultra low distortion differential RF/IF amplifier
  • 23dB bandwidth of 2.2GHz
  • Low noise input stage
  • Drives 12-bit to 16-bit ADCs at highest practical IF
• AD8362 50Hz to 2.7GHz 60dB TruPwr™ detector
  • Accurate rms-to-DC conversion from 50Hz to 2.7GHz
  • All functions temperature and supply stable
• ADF4106 PLL frequency synthesiser
  • 6GHz bandwidth
  • Industry’s lowest normalised phase noise
• ADF7021 high performance narrowband ISM transceiver
  • 2FSK, 3FSK, 4FSK, MSK modulation schemes
  • Best in class Rx sensitivity provides extended RF range
• ADG904 wideband analogue 4:1 multiplexer
  • 23dB at 2.5GHz
  • 37dB isolation at 1GHz
  • Low current consumption for portable applications
  • Low power consumption: 1mA maximum
• ADG919 wideband switch
  • 23dB at 4GH
  • High off isolation (43dB at 1GHz)
  • Low current consumption for portable applications
• ADL5350 4GHz high linearity, low power Y-mixer
  • Broadband RF, IF and local oscillator ports
  • Single-ended design: no need for baluns
• ADT7519 SPI/I²C compatible temperature sensor
  • 4-channel ADC and quad voltage output DAC
  • 10-bit temperature-to-digital converter
  • Remote temperature measurement option
• ADuC845 precision analogue microcontroller
  • Integrates precision analogue with MCU and Flash
  • Industry standard 8052 8-bit MCU
  • On-chip Flash for in-circuit programming

For further information, including the Analog Devices Wireless Applications Brochure with CD-Rom, please click here